The Roadmaster EZ Base Plate Kit # 52728-1 is the correct base plate kit for your 2009 Mazda MX-5 Miata. There are several other components needed to flat tow your vehicle that you may be interested in also.
You will want a tow bar also to provide the connection point from the base plate kit to your tow vehicle. For that I recommend you get a RoadMaster Sterling All Terrain Tow Bar # RM-576. This tow bar comes with wiring, safety cables and quick-disconnects also. Check out the review... view full answer...
There is not a hitch mounted spare tire carrier for your MX-5 compatible with the Curt trailer hitch # C11435 but I do have an alternative solution for you. You can use a compatible cargo carrier and we have the following to choose from:
17x46 Curt Cargo Carrier # C18145
19x47 Curt Cargo Carrier # C18110
20x47 Reese Cargo Carrier # 63155
The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11435 is the correct hitch fit for your 2018 Mazda Miata MX-5. You will also need... view full answer...
For your 2017 Mazda Miata we have the Curt hitch part # C11435 as a confirmed fit that would work well. At one point Curt was very strict about requring a stabilizer strap with non-supported loads like bike racks but at this time they have softened on that and instead only recommend it. This is a 1-1/4 inch hitch and is the only size we have for your vehicle.
The most popular bike rack we carry that has been confirmed to fit this vehicle is the Thule Camber 2 part # TH9058. We asked our... view full answer...
Yes, the Curt hitch part # C11435 is a confirmed fit for your 2016 Mazda MX-5 Miata and would have enough capacity for pulling a jetski trailer. It has a 2,000 lb capacity which would be more than enough.
For trailer wiring you'd then need the part # C56300 which is a confirmed fit. This installs by plugging inline with the taillight connectors for an easy install.
For a ball mount you'd then want the part # C45521 and ball part # A-80 and pin/clip part # F-4. view full answer...
Using a 1-1/4 inch to 2 inch adapter isn't my favorite solution for situations like yours as the adapters end up cutting the capacity of the hitch in half and also add quite a bit of movement. Since lighter duty vehicles like your 2020 Mazda MX-5 only have the 1-1/4 inch hitch size available the best recommendation I can make is a rack designed for this hitch size like the Sherpa that fits this hitch size part # SH12G. view full answer...
If your 12V batteries are wired in parallel for 12V output, the Go Power Pure Sine Wave Inverter # 34279948 that you were looking at should work great to power your RV fridge. This pure sine wave inverter provides 1,000 watts of continuous output power, more than enough for your fridge that draws 6.61 amps. Having both your batteries run in parallel will also extend its run time when powered.
I have attached a short video demonstration on this inverter and the instructions manual that... view full answer...
We have what you would need to make the adapter you would need, but we don't sell one ready to go.
What you will first need is the # PK12720 for your trailer to plug into, next you will need a signal converter to take the combined signal of your Jeep's 4-way to the separate signal of your trailer. For that you would want the # C56196. Lastly, you would need # HM48110 for a 4-way to plug into the Jeep 4-way.
When connecting the converter to the 4-way the wires will match up color for color,... view full answer...
I attached a picture that shows where to attach the safety cables when installing the Roadmaster EZ Base Plate kit part # 52728-1. Here's the text too though.
Attach the ends of the 8” safety cables to the front holes in the cable
mounting tabs located on the inside of the receiver braces with the included
cable connectors (Fig.X). Connect the other end to the tow vehicle's safety
cables and tow bar. view full answer...
The correct Curt trailer hitch for your 2007 Mazda MX-5 Miata is the Curt # C11028, the part # C11729 that you referenced is not a fit as it is for Older model Miatas. view full answer...
The most popular bike rack we carry that has been confirmed to fit this vehicle is the Thule Camber 2 part # TH9058. We asked our demo and install guys to name their favorite, most easy-to-use bike racks and this one showed up in nearly everyone's top three. Check out the review video I attached for more info.
Curt requires the use of their stabilizer strap part # 18050 when using their hitch to carry a non-supported load like a bike rack. I attached a review video for you to check for... view full answer...
The Hollywood Racks Trail Rider, part # HR200Z, is an excellent choice for your 2013 Mazda MX-5 Miata. It is perfectly safe and compatible with a Class I hitch.
I've linked to a video review below. view full answer...
The trailer hitch I recommend for a 2020 Mazda MX-5 Miata is the Curt Trailer Hitch Receiver part # C11435 which is a direct bolt-on fit. I have attached an install video I did below. It will not void any warranties. It has a class I rating so as long as you are using a class I rated bike rack there won't be any issues. I recommend the Thule Helium Pro 2 Bike Rack part # TH9042PRO which is super lightweight and comes with locks for security. view full answer...
Since you said you want the best possible ground clearance without sacrificing quality the best option you'll have is the Saris SuperClamp EX part # SA4025F. This rack has a shank rise of 5 inches and the wheel trays support the wheels from the bottom of the tire so none of the tire would pass through it at all. This rack is also very lightweight at 35 lbs which is going to be the lightest option around.
Check out the review video I attached for more info on this as well. view full answer...
I have a solution for you.
Roadmaster EZ Base Plate Kit - Removable Arms # 52728-1.
Roadmaster Falcon All Terrain, Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 6,000 lbs # RM-522.
These two units are not compatible with each other and you will need to get a crossbar style tow bar.
If you are deadset on getting the falcon you can use the Replacement Quick Disconnect Crossbar Assembly for Roadmaster Motorhome Mounted Tow Bars # 910021-00.
Roadmaster StowMaster Tow Bar - Car Mount... view full answer...
You can see our range of 6-lug aluminum trailer wheels with ST225/75R15 tires by clicking on the linked page.
We offer both pre-mounted radial and bias ply type tires in your size. You can simply click on the preferred type to narrow the products shown to those with radial or bias tires. We also have two available load ranges in this size, Load Range D and Load Range E. It is always a good idea to have some safety margin in your trailer setup so choose tires that offer more weight capacity... view full answer...
Since there are no folding hitch mounted cargo carriers that will fit a 1-1/4 inch hitch like what you have on your 2002 Mazda Miata your best option would be to go with the Curt Carrier, part # C18110, as it has a rise of 3-3/4 inches and would work well for you.
I attached a review video for you to check out as well. view full answer...
For your 2017 Mazda MX-5 Miata, I recommend eh Roadmaster EZ4 Base Plate Kit - Removable Arms # RM-524450-4 you mentioned. I recommend using the Loctite Threadlocker 262 - High Strength - Up to 3/4" Nuts/Bolts - 0.20-Fl-Oz Tube # LT37420 for this installation.
The adapter that is compatible with those baseplates is actually the Roadmaster Tow Bar Adapter # RM-032 and that will work very well with your Blue Ox Aventa LX Tow Bar. If you don't have the safety cables, I recommend the replacement... view full answer...
The correct trailer wiring harness from Curt that fits your 2016 Mazda MX-5 is the part # C56300 which installs easily by plugging inline with your taillight connectors and also does not require any splicing. view full answer...
The best bike rack for your hybrid specialized bikes and your 2011 Mazda Miata will likely be a hitch mount bike rack, but this will require your vehicle to have a trailer hitch. Hitch mount bike racks will have zero contact with the vehicle and you have the option of choosing a platform style bike rack that makes it easier to load and carry specialized bikes.
If you are interested in this option and need a trailer hitch, then you can install the Curt Class I Trailer Hitch, # 11028, as... view full answer...
Go To Results